815.322.1024

SERVING THE CHICAGOLAND AREA

Better than the current common installation of the Xenon or Halogen lamps that are installed in most cabinets and closed glass solutions, our lights at full brightness only get warm to the touch.


Additionally, each lamp in a current solution can be as much as 20 watts at each bulb which usually need replacement on a yearly rotation depending on use.  The solution we provide consumes on average 85% less power for the same light and is rated for 70,000 continuous hours before any brightness degredation and 100,000 continuous hours for the full life of the LED.


Heat is the most degrading factor to the life time of an LED. In an effort to get the most life out of these solutions, we have designed a system which has a ceramic heat transfer layer to an aluminum substrate. So the heat generated by the intensity of the light is drawn away and transferred to an excellent heat transfer system.

Within several kitchens there are "disconnected areas" that require a separate lighting system. Each separate area then has its' own individual dimmer control.  Our system can be installed in all of these areas including a disconnected island. One master controller, with one dimmer control, wirelessly communicates the dimmed level for the zone that is being changed. This way all of the disconnected areas dim in concert together.


The dimming ability of our lighting system is a full digital control which allows for the full dimming range to be used. No more Low, Medium and High, to choose from. Our system will allow a very balanced and gradual range from completely off, to full brightness.


To achieve an elegant finish, we have a great range of colors to choose from. Within the white bands we have everything from stark white to a very warm comfortable feel that leans towards the warm yellow spectrum.

DIFFERENT

BY DESIGN

Services

Our lighting system can have up to four zones of separate dimming areas all wirelessly connected at the same level from a single controller. For example zone 1 could be all of the counter top lighting for all of the areas in a kitchen if they are connected or not. A second zone could be all of the above cabinet lighting. A third zone, would be all of the internal glass door cabinets with glass shelving. A fourth zone would be all of the toe kick area lighting. All of the dimming would come from a single controller with four knobs to set the level of dimming, even if they are disconnected from the main control area.

control

BY zone

Remodeling and Home Design